FREE SHIPPING FOR COIL ORDERS OVER €70

Test print:

Recommended settings:
Nozzle temperatures: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, PEI.

The advantage of PCTG material is improved PETG, which resists 5 - 10°C more than PETG filament, has higher strength and is very easy to print; you don't need a 3D printer with a case, and the printing speed is comparable to printing PLA, PETG filament. The PCTG material has an excellent load-bearing structure due to its strength, which ensures that the layers adhere perfectly during printing and, as a result, the products are structurally strong and resistant to mechanical influences.

Our PCTG filament is extremely durable, solid and odorless. It is an excellent filament that combines a combination of strength and flexibility, so it is also used for printing mechanical products in robotics. Because it has an extremely minimal degree of shrinkage and flex, it is ideal for printing large products. It is a material that stands out for its glossy finish, and is therefore also used for printing decorative elements.

To obtain good results, it is necessary to print at a temperature of 230–240°C and the print bed must be heated to 80–90°C. Please note that the print media temperature range may vary slightly depending on the use of other printers.

Strength: High| Flexibility: Medium | Durability: High

Difficulty of use: Low | Shrinkage/warping: Minimal

Soluble: No | Food Safe: Azurefilm PCTG is food safe

✅ Flexible

✅ Durable

✅ Strong

✅ Easy to print

❌ Susceptible to humidity

❌ The surface is easily scratched