FREE SHIPPING OVER €70 OF COILS

2022 marks the birth of ECOSMART, the new RPETG by Printologist, a revolutionary filament, which promises to become the reference for hobbyists, in fact its philosophy embraces all the main needs of today:

1. Eco-friendly

Thanks to its RPETG-based granule that is up to 100% recycled and recyclable, cardboard reel and sealed in bamboo bioplastic, it has everything you need for a zero impact product!

2. Economical

In a future that opens 3D printing to large-scale consumption, the prerogative is to make the raw material accessible to all, which is why ECOSMART is the cheapest material on the market.

3. Fun

We print to have fun, which is why ECOSMART prints as easily as a classic PETG, you will have models resistant to temperatures and shocks suitable for all uses.

It does not require a closed chamber, is non-toxic and low shrinkage.

Print settings

Printing tips

1. For a perfect first layer, lower the speed, turn off the fan and slightly increase the flow.
2. This material has the maximum aesthetic yield with low extrusion (230°), the mechanical potential instead increases at high temperature (245°) and moderate printing speed, the fan will always remain off.
3. It is always recommended to bring the hot dish to 70 - 80° and use hairspray.

Recommendations

The Ecosmart is RPETG, as such requires prior PETG printing experience. Although not difficult to print, a minimum amount of 3D printing know-how is required, so we advise beginners who are trying to print a material other than PLA for the first time to start with a small quantity to test. The colors may differ slightly from the photos, depending on the type of recycled material.