FREE SHIPPING FOR COIL ORDERS OVER €70

Test print:

Recommended settings:
Nozzle temperatures: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, PEI.

The advantage of PCTG material is the improved PETG, which withstands 5 - 10 ° C more than PETG filament, has higher strength and is very easy to print; you do not need a 3D printer with a case and the printing speed is comparable to printing PLA, PETG filaments. PCTG material has an excellent load-bearing structure due to its strength, which ensures that the layers adhere perfectly during printing and, as a result, the products are structurally strong and resistant to mechanical influences.

Our PCTG filament is extremely durable, solid and odorless. It is an excellent filament that combines a combination of strength and flexibility, so it is also used for printing mechanical products in robotics. Since it has an extremely low degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a glossy finish, and therefore it is also used for printing decorative elements.

For good results, you should print at a temperature of 230–240°C and the print bed should be heated to 80–90°C. Please note that the temperature range of the print media may vary slightly depending on the use of other printers.

Strength: High | Flexibility: Medium | Durability: High

Difficulty of use: Low | Shrinkage/warping: Minimal

Soluble: No | Food Safe: Azurefilm PCTG is food safe

✅ Flexible

✅ Durable

✅ Strong

✅ Easy to print

❌ Susceptible to humidity

❌ The surface scratches easily