{"product_id":"3dxtech-stat-esd-petg-filamento","title":"3DXTECH STAT™ ESD-PETG 1,75mm\/750g","description":"\u003cp\u003e 3DXSTAT ESD-PETG is an easy-to-use ESD-Safe filament formulated for a wide range of applications requiring electrostatic discharge (ESD) protection and enhanced chemical resistance. Made using high-flow PETG copolymer and CNTs to provide exceptional repeatability and reliability.\u003c\/p\u003e\n\u003ch2\u003e 3DXSTAT ESD-PETG\u003c\/h2\u003e\n\u003cp\u003e 3DXSTAT ESD-PETG is an advanced anti-ESD compound designed for use in critical applications requiring electrostatic discharge (ESD) protection. Manufactured using cutting-edge multi-wall carbon nanotube technology, advanced compounding technology and precision extrusion processes. Target surface resistance of 107 to 109 Ohms.\u003c\/p\u003e\n\u003ch3\u003e The benefits of PETG include:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Superior chemical resistance compared to ABS\u003c\/li\u003e\n\n\u003cli\u003e Amorphous structure that gives low, nearly isotropic shrinkage\u003c\/li\u003e\n\n \u003cli\u003eLow moisture absorption, 3 times lower than ABS\u003c\/li\u003e\n\n\u003cli\u003e Very low odor emitted during printing\u003c\/li\u003e\n\n\u003cli\u003e Superior ductility compared to ABS\u003c\/li\u003e\n\n\u003cli\u003e Wide working range of 230-260°C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e The benefits of 3DXSTAT™ include:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Constant surface resistivity\u003c\/li\u003e\n\n\u003cli\u003e Better impact and stretch retention\u003c\/li\u003e\n\n\u003cli\u003e Low particulate contamination\u003c\/li\u003e\n\n\u003cli\u003e Minimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003e Chemical resistance of PETG:\u003c\/h4\u003e\n\u003cp\u003e PETG molded unstressed tensile bars exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts and soaps, and to aliphatic hydrocarbons, alcohols and a variety of oils. Halogenated hydrocarbons, short-chain ketones and aromatic hydrocarbons dissolve or swell the plastic.\u003c\/p\u003e\n\u003ch3\u003e Typical ESD-PETG applications include:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Semi-con: HDD components, wafer handling, masks, enclosures and connectors\u003c\/li\u003e\n\n\u003cli\u003e Industrial: transportation, measurement and sensing applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Target Conductivity for 3DXSTAT ESD-PETG:\u003c\/h3\u003e\n\u003cul\u003e\n\n \u003cli\u003eSurface resistivity from 10^7 to 10^9 ohms on 3DP sample using concentric ring test method.\u003c\/li\u003e\n\n\u003cli\u003e Note: Internal studies have indicated that increasing the extruder temperature can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set up differently as well as part geometry. Therefore, expect some trial and error time to understand how this filament works in your specific printer\/application. However, do not exceed 270°C to reduce the risk of polymer degradation. \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/5963\/4492\/files\/13631__3DXTech__001.jpg?v=1731106120\" alt=\"3DXTECH STAT™ ESD-PETG 1.75mm\/750g - 3Digital | Drones and 3D Printers\"\u003e\u003c\/p\u003e\n\u003ch4\u003e Surface conductivity as a function of extruder temperature:\u003c\/h4\u003e \u003cp\u003eThe surface resistance of the ESD-protected part varies depending on the printer's extruder temperature. For example, if tests indicate that the part is too insulating, increasing the extruder temperature will result in better conductivity. Therefore, the surface resistance can be \"tuned\" by adjusting the extruder temperature up or down depending on the reading you receive from your end.\u003c\/p\u003e\n\u003ch3\u003e Recommended print settings:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Extruder: 230-260°C\u003c\/li\u003e\n\n\u003cli\u003e Bed temperature: 60-90°C\u003c\/li\u003e\n\n\u003cli\u003e Bed Prep: Magigoo Bed Prep Adhesive and 3DXTECH Polyimide Tape\u003c\/li\u003e\n\n\u003cli\u003e Heated room: not required\u003c\/li\u003e\n\n\u003cli\u003e Supports: Water-soluble AquaTek X1 USM works great for complex parts.\u003c\/li\u003e\n\n\u003cli\u003e Drying instructions: 65°C for 4 hours.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":48511278088536,"sku":null,"price":86.06,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/5963\/4492\/files\/3dxtech-stattm-esd-petg-1-75mm750g-3digital-droni-e-stampanti-3d.png?v=1773786480","url":"https:\/\/3digital.tech\/fr-eu\/products\/3dxtech-stat-esd-petg-filamento","provider":"3Digital","version":"1.0","type":"link"}