ANYCUBIC PRESENTS ITS NEW KOBRA 3 COMBO AND PHOTON MONO M7 PRO 3D PRINTERS

Shenzhen-based 3D printer manufacturer Anycubic has launched its new Kobra 3 Combo and Photon Mono M7 Pro 3D printers .

The Kobra 3 Combo Bundle includes a next-generation Kobra 3 printer, along with the debut of the Anycubic Color Engine Pro (ACE Pro). This comprehensive offering also includes a suite of updates to the Anycubic app and Slicer, along with the previously announced live community platform, Makeronline .

Speed ​​and volume updates with Anycubic Kobra 3

Anycubic claims that Anycubic Kobra 3 represents a notable advancement over its predecessor, the Anycubic Kobra 2 series . It offers improved speed, reaching up to 600mm per minute for normal single-colour printing. Additionally, it includes features such as accelerometers, vibration compensators, and flow control mechanisms to maintain print quality at high speeds. With a larger print volume of 250 x 250 x 260 mm, there is a notable increase of 34% compared to the previous model.

The Kobra 3 runs on the Kobra OS firmware, which has been optimized for efficient performance. This firmware improves the computing power and responsiveness of the motor, enabling accurate movements and extrusions of filaments. Thanks to the integrated accelerometer module, it is able to identify the resonant frequencies of the X/Y axis, making the necessary adjustments to the motion control to reduce unwanted distortions, resulting in consistent print quality.

Anycubic ACE Pro and PANTONE collaboration

Next up is the new ACE Pro which improves convenience and reliability, according to Anycubic. It allows simultaneous printing with two boxes connected, supporting up to eight colors simultaneously. With RFID recognition for Anycubic filaments, it ensures consistent print quality. To address the negative impact of humidity on print quality, the ACE Pro incorporates an active drying feature, making it the only product to combine active drying with multi-color printing capabilities, the company says.

Its intelligent side-drying mechanism keeps the filament dry during extended printing sessions lasting up to 24 hours, ensuring optimal printing conditions and consistent results. Thanks to the anti-tangle protection design, the risk of printing interruptions due to filament tangling is minimized. The company says that using a parallel connection of four discharge tubes made switching from one color to another seamless, eliminating the need for manual filament manipulation and enabling smooth color changes for uninterrupted printing .

Plus, Anycubic's collaboration with PANTONE offers a range of unique, true-to-life colors for your next prints. These are said to be the 3D printing industry's first certified consumable colors, including Peach Fuzz, Interstellar Violet, Tropical Turquoise, and Spring Leaf. Each color adds depth and personality to any printed artwork, allowing users to unleash their creativity and explore a wide range of colors.

The new Photon Mono M7 Pro

Photon Mono M7 Pro offers a high resolution of 13312 x 5120 pixels for 14K precision and an XY resolution of 16.8 µm x 24.8 µm, a print speed of 130 mm/hour and a layer thickness of 0. 1 mm. A light uniformity algorithm ensures that over 90% of the light is distributed across the screen for uniform printing. For detailed prints, the minimum shaping capacity is 0.15mm and the minimum hole diameter is 0.3mm. A dynamic lighting compensation system adjusts light output based on the print surface and resin flow rate, potentially optimizing exposure and separation for higher print success rates.

This printer also comes with an intelligent printing system that boasts features like a resin vat with dynamic temperature control. This vat uses a heating tube to maintain resin flow, improving success rates. Before printing, an automatic sensor detects the temperature and allows users to adjust the temperature from 5℃ to 25℃ in 20 minutes for optimal viscosity and precise printing.

The M7 Pro offers several features designed to simplify the printing process. An automatic resin filling unit refills the resin vat (up to 750ml) when levels drop, preventing printing interruptions. Furthermore, the remaining resin can be easily collected by pressing just one button. Borrowing from the M5s Pro, the M7 Pro boasts intuitive features like a leveling-free setup, allowing for easy unpacking and attachment for instant printing. Automatic detection ensures the printer is always primed and ready to use, the company says.

The updated Photon Workshop offers improved support for the Photon Mono M7 Pro. Optimized algorithms mean fewer supports are needed for precise model support, making removing supports easier. The splitting process is simplified, while an automatic template file repair function ensures maximum efficiency through flawless prints.

Software and community support

The Anycubic app and Slicer are software programs that offer features for coloring, editing, and slicing templates for multicolor printing. These programs can simplify the process compared to manual methods. Users can also remotely control and monitor their printers via the app on computers and smartphones. You can connect an external camera for real-time monitoring of printing progress. Additionally, the slicer software will soon support LAN mode for potentially greater convenience and privacy.

Finally, this package also includes the Makeronline community platform that helps users share their models, communicate with each other, and access information about 3D printing. The platform also hosts sweepstakes to further enhance collaboration between users. With this new platform, Anycubic aims to improve the 3D printing experience.

To stay up to date on the latest 3D printing news, don't forget to sign up for the 3D printing industry newsletter or like our page on Facebook .

While you're here, why not subscribe to our YouTube channel ? With discussions, debriefings, video shorts and webinar replays.

The featured image shows Anycubic's Kobra 3 Combo and Photon Mono M7 Pro. Image source: Anycubic.